Make Your Own Solar Electric Fence

Published: 23rd April 2010
Views: N/A

Solar electric fences are commonly used by farmers who must prevent their animals from drifting off their land. Regrettably these can cost a great deal of money that the farmer may not have on hand. Study how you can make your own electric fence without dropping as much money.



First you have to pick out a fencing system that will work for the land you are building it on and the reason you are making it. It is important to consider the animals that you are attempting to corral and whether or not this is a temporary or permanent thing.



Once you have this you need to get a solar fence charger and any other accessories that it may come with. Try to ask the salesclerks at the farm store for data on what the better system is to utilize.



Now you are ready to begin building the fence. Start at the end and corner posts and extend a string between all of them. This will be used as a mark where the line posts will be. Ensure to extend the wire or mesh around the perimeter and then connect the insulators and tensioners.



Now mount the charger to one end of the fence. It is more dependable if you position it on a building or wooden post where it can get direct sunlight. Create a ground bed near the charger. To do this dig a shallow hole and drive in the quantity of ground rods that is necessary for the installation of the system. Link the negative ground lead to the ground rods and the positive to its respective mate.



Allow the charger to stay in the sun for a whole day before you attempt to turn it on. When the time is finished check the voltage connected to the fence utilizing a tester. Remember to put on the required safety gear when you place the solar electric fence´╗┐ together and test it.


Report this article Ask About This Article


Loading...
More to Explore